The return of “The Timbs Special” roadster

March 3, 2010
 


By Ken Gross

Return w/us now to those thrilling days of yesteryear, when custom cars, as we regard them today, hadn’t yet clearly been defined. In the ‘40s, there were still coachbuilders such as Bohman & Schwartz (Pasadena, CA), Coachcraft (Hollywood, CA), Howard “Dutch” Darrin (Santa Monica, CA) & Enos Derham (Rosemont, PA) who artfully restyled production cars for clientele who could afford to commission a bespoke vehicle.

At the same time, pioneer customizers such as Harry Westergard (Oakland, CA), along w/Los Angeles-area craftsmen George & Sam Barris, Gil & Al Ayala, Link Paola & others were chopping tops, stripping off chrome, reworking bodies w/fade-away fenders & significantly altering the appearance of what were then relatively late-model cars. They were joined by countless backyard practitioners whose #s increased exponentially across the U.S., especially after cheap, easy-to-use fillers such as Bondo & fiberglass matting became available.

Customizing techniques were promulgated country-wide in Dan Post’s “Blue Book of Custom Cars,” numerous Fawcett 1-off publications &, when Robert E. “Pete” Petersen’s magazine empire took flight, Hot Rod, Car Craft, Rod & Custom & even Motor Trend chronicled the burgeoning custom car scene.

There was another category of custom car that pretty much defied description. It includes the works of talented men who basically designed their cars from the ground up, usually (but not always) using a modified proprietary chassis along w/engines from production cars. More often than not, they’d build one car for their personal use, & that vehicle, if it were sufficiently striking, might appear in a magazine, along w/information — & even a cutaway drawing — detailing how it was conceived & constructed.

Building a cover car

While many of these scratch-built custom creations were fully backyard efforts w/fundamental engineering based on production car technology, Norman Timbs’ car was very different. So was Timbs. He was a skilled mechanical engineer who’d earlier designed the 1947, 1948 & 1949 Indy 500-winning Blue Crown Specials, driven by Bill Holland & Mauri Rose, & worked w/the irrepressible Preston Tucker on the Tucker 48 Torpedo design. More on Timbs later, but 1st, let’s talk about his one-of-a-kind car.



The sleek, aluminum-bodied, rear-engine roadster was featured on the cover of the 2nd issue of Motor Trend in October 1949. A lovely model, standing behind the car, posed in the driveway of a then-contemporary ranch house. The Timbs Special’s immense tapered tail extended toward the camera. The car’s lozenge shape represented a stunning contrast to the era’s domestic models.

Notable features included skirted fade-away fenders; a close-coupled, contoured cockpit w/out doors; a raked & split windshield; “Siamesed” dual exhaust tailpipes (like those on a Duesenberg Model J); & 1939 Ford teardrop tail lamps. Its 15” wheels were shod w/wide whitewall tires & accessory hubcaps that resembled Cadillac “sombreros.”

Without benefit of a 4-color cover (early MT covers had b&w illustrations), readers couldn’t appreciate the Timbs roadster’s deep, almost Titian red-maroon finish, speckled w/gold flake, but they surely must have been stopped in their tracks by this car’s futuristic appearance. In the post-WW II era, VW, Porsche, Tatra, the Renault 4CV & the ill-fated Tucker all espoused rear engines, but that configuration was still comparatively rare.

The Timbs roadster’s massive aluminum tail hinged just behind the cockpit & opened hydraulically, w/a single ram to reveal, & provide access to, a 1947 Buick I8 that was fitted w/dual carburetors. Earlier, Buick offered “Compound Carburetion” in 1941 on its top-tier models, & that manifold appears on this engine; Timbs reportedly ordered the powerplant as a “crate motor” from a Los Angeles Buick dealer. A chromed valve cover was added for engine aesthetics. The long I8 engine was located nearly in the center of the car’s chassis. A spare wheel & tire was mounted directly behind the engine.

Designed by Timbs, the chassis was a unique design using 4” diameter chomemoly tubing that was capped at the ends & pressurized by a small air compressor, allegedly to help stiffen the frame & supply air for the air horns. The solid front axle was a conventional Ford I-beam. The rear suspension consisted of a Packard center section w/modified Ford axle bells, centered by a Timbs-designed independent swing axle that was custom-made for this car.

The snug cockpit, accessible via step plates on each side, looked like that of a high-powered luxury speedboat, w/a Stewart-Warner 5-gauge accessory panel offset to the right that included a rare 0-5,000 rpm tach. Other instruments, including an Echlin fuel pressure gauge, were mounted in front of the driver. The full complement included a speedometer, vacuum gauge, air & oil pressure gauges, as well as dials for fuel & water temperature, & an ammeter. There was a wood-rimmed 3-spoke accessory wheel & a column-mounted Ford shift lever. As the pièce de résistance, the cockpit, dash surrounds, door panels & seat were resplendent in tan tuck-&-roll leather. No top was ever fitted.



The entire front end of the roadster was a single curvaceous piece, w/an ovalesque chromed grille reminiscent of a then-contemporary Cisitalia. It was flanked by a pair of very low-mounted inset headlamps that were in turn framed by a plated nerf bar that echoed the shape of a similar 2-plane unit on the rear. The radiator was mounted behind the grille. There was no hood opening, there were no doors. The only visible cut line was the thin vertical break behind the cockpit that separated the extended tail section.

At 1st glance, as there were no chrome trim accents, the entire car appeared to be molded in one continuous form. An underbelly undoubtedly helped its aerodynamic efficiency. The OA effect was quite startling, & for 1949, when most production models were still relatively tall & boxy, it must have resembled a car from outer space. Reportedly, it was inspired by the ill-fated Auto-Union high-speed record-setter, driven by German driving ace Bernd Rosemeyer before his fatal crash on the Frankfurt-Darmstatt autobahn in 1938.



Using quaint language that was typical of the ‘40s, Motor Trend described the Timbs roadster as “an unusually streamlined maroon job.” There was no article on the car per se, but the description — really just a photo caption — stated that the car took 3 years to construct. It was said to be 17½” in length w/a 117” wheelbase, & it had a 56” tread & weighed 2,500 lbs. Oh, & the lovely Miss Ethel Williams was a Rita La Roy model.

Apparently Norman Timbs drove the car, but not a great deal. It appeared at a few shows to great acclaim, but little is known of its in-use history. Timbs, who lived in Van Nuys (CA) at the time, advertised his “2-seater sports” in Road & Track  (R&T) in February 1950 for $7,500. The R&T classified ad claimed the car was capable of speeds in excess of 100 mph & it had been driven less than 5,000 miles.



The path to oblivion

In 1952, the Timbs Special was owned by an Air Force captain named Jim Davis, who lived in Manhattan Beach (CA). Wayne Thoms wrote a story about the car in the February 1954 issue of Motor Life entitled “Almost Airborne.” In the photographs, the Timbs car appears to have been repainted in a light color. Thoms reported that engine & driveline were 1948 Buick, & noted that the steering column & ignition lock were Ford components. His article stated the height of the car at the windshield was 38” & that the hand-formed aluminum body, built in sections on a wooden buck then meticulously welded together — had been built by noted L.A.-area race car fabricator Emil Diedt at a cost of $8,000.

It’s unclear whether Thoms or the author drove the roadster, but the Motor Life article claimed “ … the performance is almost as fantastic as the appearance,” that the Buick engine “ … had been hopped up to develop in the region of 200 bhp,” & “ … a top speed of 120 mph should be no problem.” Thoms made some interesting comments on the car’s handling:

“Fortunately, this car has the essential ingredients — precise steering, flat cornering, positive brakes — all necessary safety factors which are too important to overlook. Suspension is thru conventional transverse leaf springs all around. A De Dion-type rear axle provides independent suspension for the rear wheels, needed because the engine, transmission & differential are in line, virtually as a unit, w/no driveshaft separating transmission & rear end. If this is confusing, remember that the engine is in the rear; the only thing in front of the driver & passenger being the radiator which, incidentally, mounts a small electric fan for auxiliary cooling.”

After USAF Captain Davis’ tenure, the ex-Timbs 2-seater had a few subsequent owners; it reportedly appeared in a TV episode of “Buck Rogers;” it was displayed for many years in front of the Half Way House restaurant in Saugus (CA), where children played & jumped on its fragile aluminum body; & it appeared briefly in a few frames of the Nicholas Cage film “Gone in 60 Seconds.” Carelessly stored outdoors by an unknown owner in Antelope Valley, in California’s high desert, it was then bought by a man who apparently was a prop man for a Hollywood studio. The famed Norman Timbs Special deserved a better fate. Thankfully, that was about to happen.



Locating & preserving a legend

I 1st saw the Timbs Special at the Petersen Museum where it was stored prior to a 2002 Barrett-Jackson auction. Exposed to the elements for years, abandoned & forlorn, it was in very rough shape. Gary Cerveny purchased it at that sale for just $17,200. “I didn’t know about the car until I saw it at the auction,” Cerveny said. “It looked intriguing, & when it didn’t seem to be selling, I decided to bid.”

Cerveny, who likes to drive all of his 35 collector cars, simply wanted the Timbs roadster to be a good driver. But ensuing publicity in Mark Morton’s Hop Up magazine & on the Web convinced him that this was an important car, & it deserved a 1st-class, historically accurate restoration.

“Some time earlier, I restored a belly tank,” he recalled, “& as most of the Timbs car was all there, I mistakenly thought it’d be an easy restoration.” After performing much of the engine work & beginning the body refurbishing, Cerveny realized, “as the process went along, it was more complicated than I thought, & I was in over my head.” Roger Morrison recommended that Cerveny send the car to Dave Crouse’s shop, Custom Auto, in Loveland (CO).

Crouse, who has restored several important historic hot rods, said the restoration “ … was very difficult. This car was built as a concept exercise,” Crouse continued, “so we had to do a lot of work to make it function properly. The tail section is huge, & a previous owner apparently couldn’t lift it up easily, so he cut a large square hole in the top of the rear section to access the engine. He also cut the wheel wells open to change the rear tires. Workmanship on the body is 1st rate,” Crouse reported, “but there were no stiffening members to help the body retain its shape.”

“Gary & his dad began the aluminum patching & repairs,” Crouse continued, “but they were dealing w/huge compound shapes, & their torch work resulted in some panel warping. Once the car was in our shop, Rex Rogers, my metal guy, carefully restored the panels & then fabricated aircraft-style ribs so the aluminum body could maintain its shape & we could paint it.”

“The aluminum was pretty frail,” added Rogers. “The windshield posts were badly corroded, so we recast those. And the dash had been changed.”

“We had to have a system to lift the body up,” Crouse explained. “So we installed an electric motor screw jack that bolts to the frame in the same place as Timbs’ original (& much too powerful) hydraulic strut. This was a practical step; the heavy body has to open for access to the engine & the rear suspension.” The only other substantive change was converting the electrical system from 6 to 12 volts.

“This car is a monster to work on,” Crouse added. “The nose is fixed; there’s no hood & the radiator is in front, w/an expansion tank located behind the cockpit bulkhead. We got all the mechanicals perfected, but it took time. Most of the linkages & controls are aircraft bell cranks. A few of them were missing & some didn’t work very well. There’s a ’46 Ford steering column w/a column shift & it goes to the nose of the car. The linkage has to run all the way to the rear & operate smoothly.”

“One problem was the Buick transmission,” Crouse said. “Unlike a Ford, w/2 levers on 1 side, the Buick has 1 lever than goes fore & aft & another that goes in & out. Fabricating functional shift, throttle & clutch linkages took some re-engineering. We actually drove the completed chassis around quite a bit to ensure everything worked before we mounted the body on it.”

“There were no splash shields behind the wheels to keep water from coming in, so we fabricated those,” he said. “The full belly pans were missing, so we made those, too. Our intent was to build a show car, but make it usable & drivable.”

“The original workmanship is incredible,” Crouse enthused. “The De Dion-type IRS uses Packard U-joints on a Ford banjo w/Ford axle bells, anchored by a conventional transverse leaf spring & tubular shocks. But the geometry apparently wasn’t right, so to make it work, someone kept adding more springs. We installed the regular Ford semi-elliptic spring pack & used air shocks powered by the car’s compressor. It works beautifully now.”

Crouse believes Timbs’ intent to stiffen the chassis by pumping air into the tubular frame under pressure was never practical.

“You’d need 1,000 psi or more before you’d notice much change,” he said. “That said, Norman Timbs was way ahead of his time. He was on the inside of the L.A. racing fraternity, working w/the best race car fabricators, & it shows. They built this car for him. The welds & the machine work on this car are gorgeous. Whoever did the body knew what he was doing. Altho there’s no proof, it could very well have been Emil Diedt.”

“This restoration wasn’t something we just whipped out,” Crouse explained. “After we finally had the shape corrected, the surface preparation took forever. To obtain a straight, even parting line, we had the tail section on & off. It’s so big you can’t reach across it, so we stood it on one end & built a scaffold to work on it. It’s the weirdest thing we ever had to do, but sometimes you’ve got to get creative.”

“My painter outdid himself,” Crouse said. “We had a little chip of the paint from a go-kart that Timbs had built for his son, Norman Jr. After consulting w/a few people, Gary Cerveny took it to Stan Betz, who experimented w/several shades, & then expertly  mixed the correct color w/the right gold flakes. We painstakingly sprayed it on in several steps, from base, to color, to the clear finish. It was like painting a 747, because the car is so huge.”

“Altho most of the parts were there, we had to locate some of the rarer pieces,” Crouse said. “Because we had photographs of the instruments, we couldn’t substitute; we had to find the right ones. There’s a small pressure gauge on the left & we used a magnifying glass to identify it.  It wasn’t Stewart-Warner — it had a crimped bezel — & we were stymied for 3 years. Pat Swanson, an instrument expert from the Pacific Northwest, told us it was an Echlin 0-10-PSI mechanical fuel pressure gauge. Even better, he had one, & he gave it to us to restore. The hubcaps are Lyons accessory items, & it took years before we found a pair to restore.”



A custom comes home

Dave Crouse said he’d known about the Timbs Special for a long time.

“The guy I use to bird dog cars & parts for me said there was ‘ … a streamliner in the high desert.’ When he described it, I told him to buy it for me. But somehow he didn’t; the car was used as a movie prop, & the owner at the time thought he’d get a lot of money for it when it came up for auction & Gary bought it. But eventually, it came home to Poppa, & we got to restore it.”

Crouse, who drove the car in test shakedowns w/out the aluminum body, as well as after the shell was permanently installed, said, “It’s quite nimble for its size & it really feels secure on the road. It’s a little like driving a bus,” he quips, “because you’re sitting so far up front w/that long tail behind you.”

Cerveny, who disassembled & rebuilt the engine, said that 2 cylinders had water in them. He wanted to keep the original block, so he installed a pair of cylinder sleeves, followed by a complete rebuild. Cerveny notes that the crosshatches from the factory cylinder bore honing were still visible, indicating that the engine had been run very little. Modifications include the aforementioned twin carbs. A pair of factory CI split exhaust headers empty into twin Smithy’s mufflers, resulting in a satisfying rumble from the parallel tailpipes.

3 years later, after a great deal more money was spent, the gleaming, beautifully restored Norman Timbs Special is complete.

“You don’t find a car like this very often,” Crouse said, obviously pleased w/his shop’s work. “We’ll tackle anything. But I can’t credit Gary enough. Whenever there was a crunch, he stepped up & we went for quality.”

“I’m really excited about this car,” Cerveny added. “I like European art-deco designs, & now that the car is completed, I’m even more interested in it, & I have no plans to sell it. My wife Diane is unbelievably excited about it, too. It’s going to be the centerpiece of our collection.”

Rescued from the high desert, restored to a “fare thee well,” primed for its 1st public appearance in decades at the Amelia Island Concours d’Elegance on 3/14/2010, the long-lost Norman Timbs Special is certain to dazzle the crowds.